ASTM D3035 Test Data

ASTM D3035 Test Data
Product	P/N	SDR	Nominal ID	Minimum Wall	Minimum Weight	Maximum Weight	Approx. Crush Strength	Approx. Tensile Strength	Coeff. Of Friction *
			(in)	(in)	(lb/100 ft)	(lb/100 ft)	(lb/ft)	(lb)	Static	Kinetic
3/4" 3/4" 3/4"	86/11 86/13.5 86/15.5	11 13.5 15.5	0.860 0.894 0.914	0.095 0.078 0.068	11.7 9.8 8.6	14.5 12.6 11.4	750 520 400	950 785 690	0.06-0.3 0.06-0.3 0.06-0.3	0.06-0.15 0.06-0.15 0.06-0.15

1" 1" 1"	131/11 131/13.5 131/15.5	11 13.5 15.5	1.075 1.121 1.147	0.120 0.097 0.084	18.5 15.3 13.4	22.0 18.7 16.8	950 630 475	1500 1225 1075	0.06-0.3 0.06-0.3 0.06-0.3	0.06-0.15 0.06-0.15 0.06-0.15

1-1/4" 1-1/4" 1-1/4"	166/11 166/13.5 166/15.5	11 13.5 15.5	1.358 1.414 1.446	0.151 0.123 0.107	29.4 24.4 21.5	33.8 28.7 25.8	1200 800 620	2350 1950 1725	0.06-0.3 0.06-0.3 0.06-0.3	0.06-0.15 0.06-0.15 0.06-0.15

1-1/2" 1-1/2" 1-1/2"	190/11 190/13.5 190/15.5	11 13.5 15.5	1.554 1.618 1.654	0.173 0.141 0.123	38.6 32.0 28.2	43.8 37.0 33.2	1350 925 715	3100 2575 2250	0.06-0.3 0.06-0.3 0.06-0.3	0.06-0.15 0.06-0.15 0.06-0.15

2" 2" 2"	237/11 237/13.5 237/15.5	11 13.5 15.5	1.943 2.023 2.069	0.216 0.176 0.153	60.2 50.0 43.9	68.3 56.5 50.1	1700 1150 880	4850 4000 3500	0.06-0.3 0.06-0.3 0.06-0.3	0.06-0.15 0.06-0.15 0.06-0.15

3" 3"	350/11 350/13.5	11 13.5	2.864 2.982	0.318 0.259	130.6 108.4	148.0 122.5	2500 1700	10500 8700	0.06-0.3 0.06-0.3	0.06-0.15 0.06-0.15

4" 4" 4"	450/11 450/13.5 450/15.5	11 13.5 15.5	3.682 3.834 3.920	0.409 0.333 0.290	216.0 179.2 157.6	244.8 202.6 178.1	3200 2200 1675	17300 14400 12600	0.06-0.3 0.06-0.3 0.06-0.3	0.06-0.15 0.06-0.15 0.06-0.15

Internal ribs will only have a minor effect on the tensile strength of the innerduct.
The static coefficient of friction for ribbed innerduct ranges from 0.10-0.32, while kinetic coeffecient of friction ranges from 0.04-0.18.

* The values for coefficient of friction will vary depending on the material or product being pulled inside of the innerduct. For more specific information, please contact us at Endot.