ASTM D2447 Test Data

ASTM D2447 Test Data
Product	P/N	SDR	Nominal ID	Minimum Wall	Minimum Weight	Maximum Weight	Approx. Crush Strength	Approx. Tensile Strength	Coeff. Of Friction *
			(in)	(in)	(lb/100 ft)	(lb/100 ft)	(lb/ft)	(lb)	Static	Kinetic
3/4" 3/4"	105/40 105/80	Sch. 40 Sch. 80	0.824 0.742	0.113 0.154	13.7 17.8	16.4 20.6	1000 1750	1100 1425	0.06-0.3 0.06-0.3	0.06-0.15 0.06-0.15

1" 1"	131/40 131/80	Sch. 40 Sch. 80	1.049 0.957	0.133 0.179	20.3 26.3	23.7 29.9	1150 1935	1625 2100	0.06-0.3 0.06-0.3	0.06-0.15 0.06-0.15

1-1/4" 1-1/4"	166/40 166/80	Sch. 40 Sch. 80	1.380 1.278	0.140 0.191	27.5 36.2	31.8 41.2	1025 1800	2200 2900	0.06-0.3 0.06-0.3	0.06-0.15 0.06-0.15

1-1/2" 1-1/2"	190/40 190/60	Sch. 40 Sch. 80	1.610 1.500	0.145 0.200	32.9 43.9	37.8 49.9	975 1775	2640 3525	0.06-0.3 0.06-0.3	0.06-0.15 0.06-0.15

2" 2"	237/40 237/80	Sch. 40 Sch. 80	2.067 1.939	0.154 0.218	44.2 60.7	50.3 68.8	900 1700	3550 4875	0.06-0.3 0.06-0.3	0.06-0.15 0.06-0.15

3" 3"	350/40 350/80	Sch. 40 Sch. 80	3.068 2.900	0.216 0.300	91.6 123.9	103.4 140.4	1200 2225	7350 9950	0.06-0.3 0.06-0.3	0.06-0.15 0.06-0.15

4" 4"	450/40 450/80	Sch. 40 Sch. 80	4.026 3.826	0.237 0.337	130.4 181.1	146.8 204.6	1150 2225	10500 14500	0.06-0.3 0.06-0.3	0.06-0.15 0.06-0.15

Internal ribs will only have a minor effect on the tensile strength of the innerduct.
The static coefficient of friction for ribbed innerduct ranges from 0.10-0.32, while kinetic coeffecient of friction ranges from 0.04-0.18.

* The values for coefficient of friction will vary depending on the material or product being pulled inside of the innerduct. For more specific information, please contact us at Endot.