|
ENDOT EndoPure: On the outside, it's blue,
color coded for the coming industry standard; on the inside it's
completely natural; overall it's the purest polyethylene, so it's;
Lead Free, Chlorine Free and Solvent Free. EndoPure comes ENDOT
sealed with our special crimping process to ensure that it remains
impurity free, Guaranteed. For your next project, make it ENDOT'S
EndoPure...and make it as perfect as possible.
ENDOT Industries backs EndoPure with a certificate
of purity in addition to a Lifetime Warranty,
including the most liberal cost of replacement provisions. (See
Warranty for Details)
Purely the best in the business! Endot EndoPure!
- EndoPure is produced from PE 4710 resin providing the strongest, most durable pipe available
- EndoPure has a clear core
of HDPE providing visible proof of quality and the assurance that
no regrind materials have been used to produce EndoPure.
- EndoPure is produced from
HDPE resin with a 20 year track record of quality and performance.
This is the same resin used for much of the gas pipe installed
in the USA.
- EndoPure is entirely compatible
with current fitting and connectors made for HDPE water pipe and
tubing.
- EndoPure has continuous consecutive
footage marks every two feet to assist in installation.
- EndoPure is UV stabilized
for protection from sunlight deterioration.
- EndoPure printing is permanently
embossed.
- EndoPure is NSF Certified
and meets AWWA C901 standards.
- EndoPure is backed by the
strongest WARRANTY
in the industry. Endot Industries is so confident that EndoPure
is the best, most durable pipe and tubing available we provide
a Lifetime Warranty and a labor reimbursement 3 times that of
other plastic pipe and tubing.
|
APPLICABLE
STANDARDS
(MATERIAL & DIMENSIONAL)
ENDOT EndoPure pipe meets
the applicable standards of ASTM D3350, ASTM D2239 and NSF-14.
|
| ASTM D3350 |
- Cell Classification |
445574E |
| ASTM D1505 |
- Density |
.945 g/cc |
| ASTM D1238 |
- Melt Index |
>0.08 g/10
min |
| ASTM D638 |
- Tensile Strength |
>3600psi |
| ASTM D638 |
- Elongation |
>740% |
| ASTM D2837 |
- Hydrostatic
Design Basis |
1600psi @ 20'C |
| ASTM D790 |
- Flexural Modulus |
150,000psi |
| ASTM D746 |
- Brittleness
Temp. |
< -103'F |
| ASTM D2239 |
- SIDR – Iron Pipe Size (IPS) Controlled Inside Diameter |
| ASTM D2737 |
- SODR – Copper Tube Size (CTS) Controlled Outside Diameter |
| ASTM D3035 |
-
DR – Iron Pipe Size (IPS) Controlled Outside Diameter |
Additional Specification
-Water Service Tubing/Pipe
-Deep Well Pipe
|
